Instruction User Manual of DEDAKJ Oxygen Concentrator of RespirEasy-Y5
Instruction Manual of Mini Oxygen Concentrator
Model: RespirEasy-Y5
Please read the instruction manual carefully before using the product
I .Product characteristics
◆◆Overview
Scope of application: This product is a portable outdoor design to provide oxygen absorption outdoors, driving, travel and plateau environments.Health care function: through oxygen absorption can improve the body's oxygen supply condition, to achieve the purpose of oxygen supplement health care. Suitable for middle-aged and elderly people, poor physique, plateau, climbers and other people with different degrees of physiological hypoxia, can also relieve fatigue and altitude sickness after the consumption of heavy physical work.
Product highlights:
A, Light and convenient, the product is equipped with portable and strap can be convenient to carry and use.
B, Rechargeable and external battery, the product has an internal lithium battery can be used for about 2 hours after the internal lithium battery power can be used for the external mobile power supply to continue to use.
◆◆Operational principle
This machine takes lithium battery power supply as the power source, takes air as the raw material. The original French imported molecular sieve is used to produce high purity oxygen.
◆◆Note before use
During transportation, the oxygen concentrator shall be kept horizontally and not inverted*Charge the device until it is fully charged before use.(Built-in battery model)No debris shall be placed at the bottom of the oxygen machine, and shall not place the machine on a soft surface such as bed or sofa.Prevent the decrease of oxygen concentration caused by the air inlet blockage.Personnel not authorized by the Company shall not remove the shell.
◆◆Operating
Ambient temperature range:+5℃ -40℃
Relative humidity range:<80%
Atmospheric pressure range: 86 kpa-106 kpa
II .Main technical parameters
Product name：Portable oxygen concentrator (continuous model)
Brand & model：RESPIREASY-Y5
Oxygen flow：The flow rate is adjustable from 1 to 5 L
Oxygen Production Method：PSA method
Weight：2.2KG+0.03KG(Including intemnal battery)
Battery duration：About 2 hours (single battery)
Battery recharge time：Internal battery pack:≤3h
Dimensions：195 x110 x216 mm
Voltage power：AC100-240V/60Hz150Hz
Atmospheric pressure range：86kpa~106kpa
Noise：≤60dB
2. Contact Information
Website: www.respireasy.com
www.dedakjoxygenconcentrators.com
www.airoxygenconcentrator.com
Email: office@respireasy.com
official@dedakjoxygenconcentrators.com
dedakj@yahoo.com
support@airoxygenconcentrator.com
Tel/ Whatsapp: +86 18000939920
Manufacturer: Shenzhen Jiaxing Technology Innovation Co., Ltd.
3. Built-in battery capacity: 12V-6400mAH
4. Adapter output: DC16.8 / 5A
III. Part schematic diagram and function introduction
◆◆Host Appearance Diagram
◆◆Product accessories:
1. One oxygen production host
2. One charger
3. Manual (warranty card attached)1PCS
4. One built-in battery
5. One vehicle charging line
6. Nasal oxygen tube: 1 PcS
5. One vehicle charging line
6. Nasal oxygen tube: 1 PcS
7.One qualification certificate
8. Black strap (optional) 1 PCS
8. Black strap (optional) 1 PCS
◆◆Display and key press description
◆Power input: connect the charging interface of the charger to the oxygen generator.
◆Oxygen outlet: oxygen outlet of the equipment after connecting the nasal oxygen tube
◆Information display: startup default is current oxygen flow L / minute,
◆Battery level: When oxygen production starts, the battery level shown on the display is full. When the battery level reaches the last grid, please shut down the device in time and charge it.
1.Continuous oxygen production
◆"Flow +" button: press once to increase 1L flow, and the maximum flow is 5l"
◆"Flow-" button: press 1L flow, and the minimum flow is 1L
Battery disassembly and assembly mode:
Battery disassembly and assembly mode:
As shown in(Figure 1/Figure 2)
IV. Portable Oxygen Concentrator Instructions
Note: Before using the oxygen generator, please fill the built-inbattery for reuse
1. Insert the charger charging head into the input power hole first, and charge the built.in battery of the oxygen generator. The power supply of the charger is always bright,charge until the battery is full, and the charging time is about 3-5 hours
2. Insert the interface of the nasal oxygen tube into the host oxygen outlet.
3. Press "switch" to start the host to start oxygen.
4. Wear the nasal oxygen tube and start taking oxygen.
5.The machine is always running by default.
6. The machine defaults to 1L output of flow. lf you feel the oxygen output is not large.you can press the flow key to select more flow.
7. Press the "switch" to turn off the main mechanism oxygen when not taking oxygen.
◆Schematic diagram of nasal suction tube
◆Treatment and maintenance when used for a long time idle
Host: When not in use for a long time, it should be charged once every 2-3 months, and packaged and stored in a dry and dark place.Nasal oxygen tube is a disposable product. Please pay attention to hygiene when using it many times.
First-class filter air intake: The main function of air filter cotton is to filter and attach dust and impurities in the air.
Over time, air intake blockage will be formed, which will affect the oxygen production effect of the oxygen machine. Please replace it in time.
First-class filter air intake: The main function of air filter cotton is to filter and attach dust and impurities in the air.
Over time, air intake blockage will be formed, which will affect the oxygen production effect of the oxygen machine. Please replace it in time.
Note: Failure to install or replace the filter cotton for a long time may affect equipment performance or damage the equipment.Please replace the filter cotton in a timely manner.and the replacement cycle depends on the use environment and usage.Generally, it is replaced once a month.
![]()
Fault investigation
Product after-sales service(warranty) card
1. Please fill in the following information in time after purchasing the products, and send this card back to the company within seven working days, subject to the local postmark, otherwise, the user is deemed to have automatically given up the after-sales service(warranty).
2. Before using the product, please read the product manual and this card carefully,and keep the card properly.No card,Can not enjoy the product after-sales service (warranty).
3. Please fill in the receipt with neat and complete handwriting (customer retention ).
4. The following scope is not in the scope of free service
purchased for more than one vear /human damage / not operating according to the instructions / force maieure event caused bvproduct failure / not provided valid product warranty card / machine has been artificially disassembled.
purchased for more than one vear /human damage / not operating according to the instructions / force maieure event caused bvproduct failure / not provided valid product warranty card / machine has been artificially disassembled.
